This blog post shows the Crestron RL Lync Room system being installed.
The installation took approximately 4 hours to complete.
We positioned the centre of mounting bracket 133cm from ground.
From the centre point between the two screens each mounting bracket centre point was positioned 74.5cm from middle point of two screens.
Room before system was fitted
Codec with side rails attached
Codec with cable tidy attached – note we took this off as it was too obstructive
Frame which holds the codec
Codec on frame – it hangs on the frame and can move left to right
Wall frame at the bottom – codec attached to frame and bracket which attaches to screen on top of the codec
Mounting frame attached to TV screen
Height adjustment of screen is done by this bracket
Right hand screen wall mount in position with accessory bracket mounted to immediate right
Both wall brackets in position; Note the codec hanging on the right hand bracket
Screens in place
Cables running through trunking
Ready for use
The finished installation
Ready for a meeting